High Voltage
Transformers, 50/60/400 Hz & Pulse
High
quality and low prices
Click on a Model number or Series number
below to get more detailed information
on that HV Transformer Model number or
Series number
Custom Designs of HV Transformers,
50/60/400 Hz & Pulse Types:
See products already designed or under development in tables below.
Ask us to quote on your custom design requirements!
E-mail: sales@dynage.com
HV Power Transformers (for Ozone
Generators):
Open Construction, Varnish-Impregnated Types
VA
Out
|
Model or Series
|
Output ac (rms) voltage and current ratings
|
Input
Voltage/Hz
|
Other Features
or Comments |
|
100
|
V1TH1MB
|
Secondary start lead is connected
to "ground".
1,000 vac, 100 mA. |
120/60
or 240/50
|
Size (inches): 3.30 x 3.75 x 4.25 |
|
150
|
V1TH1MC
|
Secondary start lead is connected
to "ground".
2,000 vac, 75 mA. |
120/60
|
Size (inches): 3.80 x 3.75 x 4.25 |
|
200
|
V1TH1MD
|
Secondary start lead is connected
to "ground".
1,000 vac, 200 mA; 2,000 vac, 100
mA;
3,000 vac, 67 mA; 4,000 vac, 50
mA. |
120/60
or 240/50
|
Size (inches): 4.30 x 3.75 x 4.25 |
|
200
|
V1TH2MD
|
Center-tap of Secondary is connected
to "ground".
2,000 vac Center-tapped, 100 mA;
4,000 vac Center-tapped, 50 mA |
120/60
or 240/50
|
Size (inches): 4.30 x 3.75 x 4.25 |
|
100
|
V1TH3MB
|
Secondary is "floating".
1,000 vac, 100 mA. |
120/60
or 240/50
|
Size (inches): 3.30 x 3.75 x 4.25 |
|
200
|
V1TH3MD
|
Secondary is "floating".
1,000 vac, 200 mA; 2,000 vac, 100
mA. |
120/60
or 240/50
|
Size (inches): 4.30 x 3.75 x 4.25 |
|
200
|
301TH-096
|
Secondary start lead
is connected to "ground".
10,000 vac (RMS) @ 20 mA (Ozone Cell Load}. |
115vac
+12%, -9%
60 Hz
|
Size: 7.55" L x 3.75" W x 5.25" H
& four (4) angle brackets on the base for mounting.
This model is in final development stage. |
|
500
|
301TH-041
|
Secondary start lead is connected
to "ground".
5,000 vac (RMS) @ 100 mA (Ozone Plates Load). |
115vac
+12%, -9%
60 Hz
|
Size: 7.55" L x 3.75" W x 5.25" H
& four (4) angle brackets on the base for mounting. |
HV Power Transformers (for Ozone
Generators):
Potted Types
VA
Out
|
Model or Series
|
Output ac voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
(later)
|
VP3TH1MC
|
(later) |
(later) |
(later) |
| (later) |
VP3TH1MD
|
(later) |
(later) |
(later) |
|
(later)
|
VP3TH2MC
|
(later) |
(later) |
(later) |
| (later) |
VP3TH2MD
|
(later) |
(later) |
(later) |
|
(later)
|
VP3TH3MC
|
(later) |
(later) |
(later) |
| (later) |
VP3TH3MD
|
(later) |
(later) |
(later) |
HV Power Transformers (for Ozone
Generators):
Oil-Filled Types
VA
Out
|
Model or Series
|
Output ac voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
195
|
300TH-956
|
Secondary start lead is connected
to "ground".
15,000 vac (RMS) @ 13 mA (Ozone Cell Load}. |
115vac
+12%, -9%
|
Size: 9" L x 5" W x 6.5" H with four (4)
8-32 x 0.5"
long mounting studs
in the base. |
HV Pulse Transformers (for Dog
Collars):
VA
Out
|
Model or Series
|
Output voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
1
|
300-635B
|
Pulse voltage of 5,000 ±500 volts,
peak when input to transformer primary is turned "off". |
See Note 1
|
Size: 1" x 0.75" x 0.66". |
|
301TH-103
|
|
|
|
Note: 1) Input is 8 vdc switched with FET
in flyback mode with "on" time up to 30 milliseconds, maximum, and with
"off" time of
240 milliseconds or more.
HV Pulse Transformers (for Electric
Fences):
VA
Out
|
Model or Series
|
Output voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
N/A
|
301TH-060
|
4,000 volt pulse of 50 microsecond width
into a 75 ohm load; and typically an 8,000 volt pulse at no load |
See Note 1
|
Size: 3.75" L x 2.76" W x 1.77" H. |
|
N/A
|
301TH-061
|
4,000 volt pulse of 150 microsecond width into a 75 ohm
load; and typically an 8,000 volt pulse at no load |
See Note 2
|
Size: 4.13" L x 3.44" W x 2.85" H. |
Note: 1) Input is 600 volt pulse with 50
microsecond pulse width, obtained by discharging a 30 microfarad capacitor
that has been
charged to 600 volts. Rep rate is about 60 times per minute.
2) Input is 600 volt pulse with 150 microsecond pulse width, obtained
by discharging a 50 microfarad capacitor that has been
charged to 600 volts. Rep rate is about 60 times per minute.
HV Pulse Transformers (for Air
Treatment Units for Produce Storage):
Open Construction, Varnish-Impregnated Types
VA
Out
|
Model or Series
|
Output voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
300
|
300TH-010
|
Output voltage pulses of up to 5000 volts,
maximum, with fixed pulse width of 800 usec, and with rep rate of 0 to
500 Hz (variable) based on input pulse rep rate; and into a load of 10
nanofarads shunted by highly non-linear resistive element. |
See Note 1
|
Size: 5" L x 4" W x 3" H.
Start lead of secondary is grounded. |
|
550
|
300TH-014
|
Output voltage pulses of up to 5000 volts, maximum, with
fixed pulse width of 800 usec, and with rep rate of 0 to 500 Hz (variable)
based on input pulse rep rate; and into a load of 10 nanofarads shunted
by highly non-linear resistive element. |
See Note 1
|
Size: 6.25" L x 4.75" W x 3.25" H.
Start lead of secondary is grounded. |
Notes: 1) The input is pulses of up to
100 volts maximum, center-tap to either side of primary (alternating),
800 usec fixed width,
with rep rate of 0 to 500 Hz using a push-pull driver topology into a center-tapped
primary winding.
HV Pulse Transformers (for Air
Treatment Units for Produce Storage):
Potted Types
VA
Out
|
Model or Series
|
Output voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
550
|
300TH-013
|
Output voltage pulses of up to 5000 volts,
maximum, with fixed pulse width of 800 usec, and with rep rate of 0 to
500 Hz (variable) based on input pulse rep rate; and into a load of 10
nanofarads shunted by highly non-linear resistive element. |
See Note 1
|
Size: 5.25" L x 4.5" W x 3.25" H
Start lead of secondary is grounded. |
Notes: 1) The input is pulses of up to
100 volts maximum, center-tap to either side of primary (alternating),
800 usec fixed width,
with rep rate of 0 to 500 Hz using a push-pull driver topology into a center-tapped
primary winding.
HV Pulse Transformers (for Air
Treatment Units for Produce Storage):
Oil-Filled Types
VA
Out
|
Model or Series
|
Output dc voltage and current ratings
|
Input
Voltage
|
Other
Features or Comments |
|
550
|
300TH-032
|
Output voltage pulses of up to 5000 volts,
maximum, with fixed pulse width of 800 usec, and with rep rate of 0 to
500 Hz (variable) based on input pulse rep rate; and into a load of 10
nanofarads shunted by highly non-linear resistive element. |
See Note 1
|
Size: 6.75" L x 6" W x 3.85" H.
Start lead of secondary is grounded. |
Notes: 1) The input is pulses of up to
100 volts maximum, center-tap to either side of primary (alternating),
800 usec fixed width,
with rep rate of 0 to 500 Hz using a push-pull driver topology into a center-tapped
primary winding. |
